Premature completion failure caused by debris interfering with valves, electronics and hardware is an ever-present threat. A robust clean up of the BOP and riser is proven to reduce this threat and the non-productive time during the completion of the well. By careful planning and the use of modern, effective methods, your pre-completion clean-up process will save you time and money.
Run three wellbore cleanup operations in one
By using a modularly clean-up string, the process of cleaning the marine riser and the BOP can be done by letting several different tools work together in one string. This highly effective clean-up string reduces the number of runs and therefore valuable time executing the completion.
Clean the marine riserThe upper part of the clean-up assembly contains string brushes, junk basket and wipers (all in one) to remove debris from the riser walls while running in and out of the hole.
Clean the blowout preventerThe middle tool on the clean-up assembly induces turbulence and assist with BOP cleaning. This jetting tool creates a flow that easily jets and cleans the cavities of the BOP and assist in carrying the debris to the surface.
Collect the JunkThe bottom part of a clean-up string captures any dislodged debris that can otherwise fall down hole.
Let’s talk numbers
Reducing the number of trips needed to perform a decent clean up, is a very effective way of reducing NPT. Depending on the water depth, you can save days compared to pulling the BOP to the platform for cleaning. Given the average rig rate of 500 000 dollars a day, this method represents a significant potential for cutting expenses and increasing the economical outcome of a project.